FE 500 TMT Bars is a high-strength thermo-mechanically treated reinforcement steel widely used for reinforced concrete construction where structural strength, durability and dependable reinforcement performance are important. The controlled manufacturing process combines a strong tempered outer surface with a relatively ductile core, making the bar suitable for a broad range of RCC applications. Jineshwar Steels supplies FE 500 TMT Barss for construction requirements involving residential buildings, commercial structures, industrial facilities, foundations, bridges and other reinforced concrete works. The bars are produced and selected with attention to dimensional consistency, surface condition, mechanical performance and applicable Indian Standards. FE 500 TMT Bars is commonly specified where engineers require a higher yield strength than conventional lower-grade reinforcement while maintaining useful ductility for fabrication and structural applications. Depending on project requirements, customers can specify bar diameter, required quantity, applicable standard, testing documentation, delivery location and other purchasing parameters.

FE 500 TMT Bars manufacturers produce reinforcement steel through a controlled sequence of steelmaking, billet preparation, rolling and thermo-mechanical treatment. The TMT process is important because it develops a hard outer rim while retaining a comparatively ductile core, providing a combination of strength and useful deformation characteristics. Jineshwar Steels focuses on supplying FE 500 TMT Bars suitable for reinforced concrete applications where dependable mechanical performance and dimensional consistency are required. During procurement, construction companies and project engineers generally evaluate the specified grade, nominal diameter, mass tolerance, rib pattern, surface condition, mechanical properties and applicable quality documentation. Proper storage and handling are also essential to protect reinforcement from contamination and avoid unnecessary deterioration before fabrication. FE 500 TMT Bars is commonly selected for structural reinforcement because its specified yield-strength level allows engineers to design reinforcement systems according to applicable structural codes and project calculations. The actual properties of each supplied batch should be verified through the relevant test certificate and inspection documentation.

Table of Contents

01

FE 500 TMT Bars Specifications

02

FE 500 TMT Bars Chemical Composition

03

FE 500 TMT Bars Mechanical Properties

04

FE 500 TMT Bars Applications

05

FE 500 TMT Bars Latest Price List

FE 500 TMT Bars exporters serve construction and infrastructure buyers that require reinforcement steel to be supplied across domestic or international project locations. Export-oriented procurement typically involves greater attention to packing, bundle identification, documentation, loading arrangements, shipping requirements and destination-specific compliance. Jineshwar Steels can support enquiries for FE 500 TMT Bars according to project specifications, required sizes and commercial supply requirements. For international procurement, buyers may request product certificates, heat numbers, packing lists, invoices, inspection records and other documents associated with the shipment. The deformed surface of TMT reinforcement helps provide mechanical interlock between reinforcement steel and concrete, while the specified yield-strength grade makes Fe 500 suitable for many reinforced concrete structures. Buyers should define the required standard, diameter range, quantity, delivery destination and documentation before finalizing an order. Material supplied for critical projects should be checked against the purchase specification and relevant inspection requirements. Proper bundling, identification and corrosion-protection practices during transportation and storage can further support material traceability and handling efficiency.

FE 500 TMT Bars suppliers support contractors, fabricators, builders, infrastructure companies and engineering procurement teams by providing reinforcement steel according to specified dimensions and quantities. Reliable procurement involves more than simply selecting a nominal grade; buyers should consider applicable standards, batch traceability, dimensional consistency, surface condition, mechanical test results and delivery requirements. Jineshwar Steels supplies FE 500 TMT Bars for projects requiring high-strength reinforcement in reinforced concrete construction. Depending on the project, bars can be required in different nominal diameters and quantities, making accurate order planning important for minimizing fabrication waste and site delays. TMT reinforcement is commonly incorporated into beams, columns, slabs, foundations, retaining structures and other RCC elements after being cut and bent according to approved bar bending schedules. Before use, reinforcement should be inspected for identification, diameter, surface condition and conformity with the project specification. Test certificates can provide important evidence of chemical and mechanical properties for quality-control records. Proper stacking above ground level and protection from prolonged exposure to aggressive conditions can also help maintain material condition before installation.

FE 500 TMT Bars stockists maintain reinforcement steel in commonly required sizes so that construction and engineering projects can obtain material according to their immediate or scheduled requirements. Stock management is particularly important for contractors working on projects where reinforcement demand changes according to the construction sequence. Jineshwar Steels caters to requirements for FE 500 TMT Bars with attention to grade, size, quantity and delivery planning. A properly managed stock of reinforcement bars should be identified by grade, size, heat or batch information where applicable and supporting documentation. Buyers can therefore reduce the possibility of receiving incorrectly specified material during fast-moving construction activities. FE 500 TMT Bars is widely associated with RCC work because its ribbed profile improves interaction with concrete and its specified yield strength supports structural reinforcement design. When selecting stock material, buyers should check the bar markings, diameter, straightness, surface condition and accompanying test documentation. Material should also be stored in a manner that reduces contact with standing water, soil, chemicals and other contaminants. These basic controls help maintain traceability and support efficient site-level quality management.

Specification	Details
Product Name	FE 500 TMT Bars
Product Type	Thermo-Mechanically Treated Reinforcement Bar
Grade	Fe 500
Applicable Standard	IS 1786, as applicable to the ordered product
Nominal Yield Strength	Minimum 500 N/mm²
Form	Straight Bars / Reinforcement Bars
Surface	Ribbed / Deformed Surface
Common Diameters	8 mm, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm, 28 mm, 32 mm and other sizes subject to availability
Manufacturing Process	Thermo-Mechanical Treatment
Application	Reinforced Concrete Construction
Supply Form	Bundled Straight Bars
Testing	Mechanical and chemical testing as specified by the applicable standard and purchase requirement
Documentation	Test certificates and inspection documentation subject to order requirements

Element	C	Mn	S	P	Cr	Ni	Cu
Typical Control Consideration	Controlled	Controlled	Max. 0.060%	Max. 0.060%	As per heat analysis	As per heat analysis	As per heat analysis

Property	Grade	Minimum Yield Strength	Tensile Strength	Elongation	Surface	Test Method
FE 500 TMT Bars Requirement / Typical Designation	Fe 500	500 N/mm²	As specified by IS 1786 for the applicable grade and test condition	As specified by the applicable IS 1786 requirement	Deformed / Ribbed	As specified by the applicable product standard