Jineshwar Steels supplies Galvanized Angle for structural, fabrication, infrastructure and industrial applications where steel strength and corrosion protection are both important. Galvanized angles are produced from structural steel sections and protected with a zinc coating to improve resistance against atmospheric moisture and corrosion. The zinc layer also provides sacrificial protection to exposed steel, making galvanized angle sections particularly useful in outdoor and semi-exposed environments.

Depending on the project specification, galvanized angles can be supplied in different leg dimensions, thicknesses, lengths, steel grades and coating requirements. Common structural grades include IS 2062, while internationally specified projects may call for grades such as ASTM A36 or equivalent structural steels. The mechanical properties belong to the underlying steel grade; galvanizing primarily provides the corrosion-resistant surface rather than changing the base steel grade.

Table of Contents

01

Galvanized Angle Specifications

02

Galvanized Angle Chemical Composition

03

Galvanized Angle Mechanical Properties

04

Galvanized Angle Applications

05

Galvanized Angle Latest Price List

Jineshwar Steels focuses on dimensional consistency, material traceability, surface quality and application-specific supply requirements. Galvanized Angle can be used for support frames, towers, brackets, platforms, fencing systems, solar structures, cable-support assemblies and general steel fabrication.

Jineshwar Steels provides galvanized angle sections for projects requiring a combination of structural performance, dimensional accuracy and improved resistance to atmospheric corrosion. As manufacturers, galvanized angle production and finishing can be planned around the requirements of structural fabricators, engineering contractors, infrastructure companies and project procurement teams. The angle profile provides two perpendicular legs that can efficiently transfer loads and create rigid connections in fabricated structures. Depending on the specification, equal and unequal leg configurations can be selected according to design requirements. Hot-dip galvanizing adds a metallurgically bonded zinc coating that protects the underlying steel from moisture and corrosive exposure. For buyers, important purchasing parameters include steel grade, angle size, thickness, length, zinc coating requirement, surface condition and inspection documentation. Jineshwar Steels emphasizes material identification and dimensional control so that galvanized angle sections can be integrated efficiently into fabrication and erection activities. For structural applications, the underlying grade should always be verified through the relevant material certificate and applicable standard.

For international projects, galvanized angle sections need to satisfy more than basic dimensional requirements. As exporters, Jineshwar Steels can support procurement requirements involving material grade, section dimensions, coating specification, packing, documentation and delivery coordination. Galvanized Angle is frequently selected for applications exposed to outdoor conditions because the zinc coating provides a protective barrier while also offering sacrificial protection to the steel underneath. This characteristic makes galvanized sections useful for infrastructure, utility structures, support assemblies and general fabrication. Export orders can be evaluated according to the destination country's technical specification, project drawings and inspection requirements. Buyers may specify equal angle or unequal angle sections, particular steel grades, cut lengths and zinc coating thickness or mass. Proper packing and handling are also important because galvanized surfaces should be protected from unnecessary mechanical damage during transportation. Jineshwar Steels approaches export requirements with attention to traceability, dimensional consistency and documentation so that the supplied sections can be evaluated against the purchaser's technical requirements before dispatch.

Specification	Details
Product Name	Galvanized Angle
Product Type	Equal & Unequal Angle Sections
Manufacturing Form	Hot Rolled Steel Angle with Zinc Coating
Base Material	Carbon / Structural Steel
Common Grade	IS 2062 E250BR
Other Grades	ASTM A36 and equivalent grades, subject to requirement
Surface	Hot-Dip Galvanized / Zinc Coated
Shape	L-Section
Leg Type	Equal Leg / Unequal Leg
Thickness	As per size and project requirement
Standard Length	Commonly 6 m / 12 m; other lengths subject to requirement
Surface Finish	Galvanized Metallic Finish
Zinc Coating	As specified by applicable galvanizing standard or purchase specification
Cutting	Standard or customized lengths
Edge Condition	Mill / Cut Edge as applicable
Inspection	Dimensional, Visual and Material Inspection
Documentation	MTC / Inspection Documents as applicable
Application	Structural, Fabrication, Infrastructure and Industrial Applications

Grade	C (%) Max.	Mn (%) Max.	Si (%) Max.	P (%) Max.	S (%) Max.	Carbon Equivalent (%) Max.
Galvanized Angle	0.22	1.50	0.40	0.045	0.045	0.41

Grade	C (%) Max.	Mn (%) Max.	Si (%) Max.	P (%) Max.	S (%) Max.	Carbon Equivalent (%) Max.
Galvanized Angle	0.22	1.50	0.40	0.045	0.045	0.41