Jineshwar Steels offers Galvanized Sheet / Coil for construction, fabrication, engineering, roofing, infrastructure and industrial applications where dependable corrosion protection and consistent dimensional performance are important. Galvanized steel is produced by applying a protective zinc coating to a steel substrate, helping protect the underlying steel from atmospheric corrosion. Depending on the specified grade and purchasing requirement, the material can be supplied in sheet or coil form, with suitable thickness, width, coating designation and surface finish.

Galvanized Sheet / Coil can be selected according to forming requirements, structural loading, fabrication method, environmental exposure and expected service life. Common specifications include hot-dip galvanized steel manufactured to standards such as ASTM A653/A653M, while other national or international specifications may be selected according to the project requirement. ASTM specifically recognizes galvanized products in both coils and cut lengths and provides different designations for commercial, forming, structural and higher-strength applications.

Table of Contents

01

Galvanized Sheet & Coil Specifications

02

Galvanized Sheet & Coil Chemical Composition

03

Galvanized Sheet & Coil Mechanical Properties

04

Galvanized Sheet & Coil Applications

05

Galvanized Sheet & Coil Latest Price List

Jineshwar Steels focuses on galvanized steel products selected for applications where the combination of a steel substrate and zinc protection provides a practical balance of durability, fabrication performance and corrosion resistance. Galvanized Sheet / Coil can be specified according to thickness, width, steel designation, zinc coating requirement and surface condition. This makes the material suitable for both routine fabrication and projects requiring controlled material characteristics. For buyers, the important consideration is not simply the presence of a zinc coating but whether the complete material specification matches the intended forming, structural and environmental requirements. Product documentation, dimensional checks and coating requirements can be reviewed against the purchase specification before dispatch. This approach helps users select galvanized steel with the appropriate combination of formability, strength, surface quality and coating performance rather than choosing material solely on appearance or nominal thickness.

Jineshwar Steels serves customers requiring galvanized steel products for projects where consistent documentation, packaging and dimensional control are important throughout the procurement process. Galvanized Sheet / Coil can be prepared according to agreed thickness, width, coating designation, surface finish, coil weight and packing requirements. For international shipments, material identification and documentation become particularly important because the product may pass through multiple handling and processing stages before reaching the end user. Proper coil protection, edge protection, moisture-resistant packing and clear marking can help reduce handling-related issues during transportation. Buyers can specify the required material standard and inspection documentation at the enquiry stage so that the supply is aligned with the project specification. The selection of galvanized steel should also account for the final fabrication process, including cutting, bending, roll forming, punching or profiling, because different steel grades offer different levels of formability and strength.

Jineshwar Steels provides galvanized steel solutions for customers who need material suited to fabrication, construction and engineering requirements. Galvanized Sheet / Coil is valued for its zinc-protected surface and availability in formats that support cutting, profiling, bending and other downstream processes. Selection normally begins with the required thickness and width, followed by the steel grade, zinc coating designation and surface finish. For roofing and cladding applications, appearance and corrosion exposure may receive greater attention, while structural applications may prioritize yield strength, tensile strength and forming characteristics. Buyers can also specify sheet dimensions or coil requirements according to their processing equipment. Material traceability, inspection records and packaging details are useful considerations when purchasing larger quantities. A well-defined technical enquiry allows the required product characteristics to be established before order processing, helping minimize variation between the purchased material and the requirements of the fabrication or construction project.

Parameter	Typical Specification
Product	Galvanized Sheet / Coil
Material	Carbon Steel with Zinc Coating
Manufacturing Process	Hot-Dip Galvanizing
Standards	ASTM A653/A653M, IS 277 and other applicable standards
Steel Designation	Commercial, Forming or Structural Grade as specified
Thickness	Typically 0.30 mm to 3.00 mm, subject to grade and availability
Width	Typically up to approximately 1500 mm, subject to specification
Form	Sheets and Coils
Zinc Coating	Selected according to required coating designation
Surface	Regular Spangle, Zero Spangle or as specified
Surface Finish	Chromated/Passivated, Oiled, Dry or as required
Edge Condition	Mill Edge or Slit Edge
Coil Form	Standard coil or slit coil
Inspection	Dimensional, Surface and Mechanical Inspection as applicable
Testing Documentation	Mill Test Certificate / Inspection Certificate as applicable

Element	C	Mn	P	S	Si	Fe	Zn Coating
Typical Range / Balance	≤ 0.20%	≤ 1.20%	≤ 0.04%	≤ 0.04%	As per grade	Balance	As specified

Property	Typical Requirement / Range	Unit	Remarks
Tensile Strength	Approx. 300–550	MPa	Depends on steel grade
Yield Strength	Approx. 140–550	MPa	Depends on grade and designation
Elongation	Approx. 10–35	%	Depends on thickness and grade
Bend Performance	Grade dependent	—	Specified according to applicable standard
Hardness	Grade dependent	HV / HR	Where specified